Keywords: quenching, stainless, steel, tank, Quench tank, agitator, brine tank, stainless steel, corrosion prevention, corrosion resistance, mixing, propeller, impeller, guide cylinder, quenching oil, quenching liquid, temperature, high temperature, top mounting, mixi, mixer, hardened,

Corrosion-resistant stainless steel agitator for quench brine tank

　　Corrosion resistant stainless steel agitator for brine quenching tank mixer is a special type agitator designed for heat treatment quenching process of Chengchi industrial furnace. It can be used to design corrosion resistant quenching tank agitator according to the characteristics of brine quenching tank. The parts in contact with salt water at the lower part of the agitator: mixing shaft, guide cylinder, fixed frame, etc. are all made of 304 stainless steel.

Corrosion resistant stainless steel agitator for brine quenching tank

　　The working principle of the mixing machine is that the motor that provides power is driven to the mixing shaft through a belt to drive the propeller type mixing impeller under the quenching liquid to rotate. Due to the restricted diversion effect of the guide cylinder, the quenching liquid (quenching oil) flows from top to bottom along the direction of the guide cylinder, turns forward through the quenching working area, and then flows back to the guide cylinder, so that the liquid in the whole quenching working area flows continuously. On the one hand, it can ensure that the temperature in the quenching working area is uniform, and when the quenching workpiece enters the quenching working area, it can quickly take away the heat of the quenching workpiece, so as to achieve the goal of rapid and uniform quenching.

Delivery site of anti-corrosion stainless steel agitator for brine quenching tank

　　The corrosion-resistant stainless steel agitator of brine quenching tank is a split structure, which is destined to be particularly suitable for quenching oil tanks requiring high temperature quenching. The service life of the motor will not be shortened due to high temperature quenching oil.

　　The quenching tank agitator is installed in a top-mounted way, which is very convenient for later maintenance and repair. Especially for large quenching tanks, it is not necessary to drain the quenching liquid. It can be lifted out of the slot as a whole or some parts can be disassembled and replaced due to failure. Maintenance is simple, convenient and low cost.

More Corrosion-resistant stainless steel agitator for quench brine tank: www.quenchtank.com/view-31.html