Tags for: probe
Testing the performance of the oil
The test uses 2 liters of 60°C quenching oil, and the initial temperature of the probe is 850°C.The... (more…)
Adjust the furnace oscilloscope probe impedance matching
electric furnace the probe of the oscilloscope needs to adjust the impedance matching part before us... (more…)
Cooling time
According to the plotted temperature-time function relationship, as described in calibration, correc... (more…)
Measurement System for Cooling Performance of Quenching Medium
The measurement system shall be capable of providing a permanent record of the cooling performance o... (more…)
Quenching medium Cooling performance Transmission mechanism
The time for the probe to move from the furnace to the container should not exceed 2 seconds. The re... (more…)
Quenching medium cooling performance probe
Cylinder as shown in the figure, alloy tube with nickel support thermocouple and geometric center. T... (more…)
Experimental device for cooling performance of quenching medium
quenching medium cooling performance experimental device consists of container, probe, heating equip... (more…)
Calibrating the cooling performance of the quenching fluid
Table Calibrating the cooling performance of the quenching fluidCooling performance Minimum Maximu... (more…)
Calibration quenching fluid
The technical requirements and storage requirements for calibration quenching fluid used for probe c... (more…)
Test Principle of Cooling Performance of Quenching Medium
A cylindrical nickel alloy specimen (probe) with a thermocouple in the geometric center is heated to... (more…)